Safety Precautions And Warnings - tecnotest EZ-SCAN 4000 Manuel D'utilisation


EZ-SCAN 4000 ___________________________________________________________________________

SAFETY PRECAUTIONS AND WARNINGS

WARNING:
Read and understand all instructions in this manual. Use appropriate personal safety
equipment including hearing and eye protection when using the scanner in or near the
vehicle engine compartment. Failure to comply can result in accidents involving fire,
electrical shock, or serious personal injury.
Electrical
•
Do not allow anything to rest on the cable assembly. Do not allow the cable
assembly to be pinched. Keep the cable assembly away from contact with heat, oil,
sharp edges,
Damaged cables increase the risk of electric shock.
•
To reduce the risk of electrical shock do not disassemble the scanner. There are no
user repairable components inside the unit.
•
Please dispose of used batteries properly. Do not incinerate batteries. Consult your
local waste authority for information regarding available recycling and/or disposal
options.
Use and Care
•
Stay alert, pay attention to what you are doing, and use common sense when
operating the scanner. Several operational tests require the engine in the vehicle
to be running during testing. Keep all children and visitors a safe distance from the
work area.
•
Keep the scanner dry, clean, and free from oil and grease. Use a mild detergent on
a clean cloth to wipe the outside of the scanner, when necessary.
•
Only use accessories that are recommended.
•
Certain capture mode tests can be performed while driving the vehicle.
It is recommends that the person operating the vehicle does not use/view the
scanner. Always use an assistant to operate the scanner while driving the vehicle.
Service
Service must only be performed repair personnel. Service or repair by unqualified
personnel may result in risk of injury, damage to the unit, and may void your warranty.
34
or moving parts. Replace damaged cables immediately.
OPERATING INSTRUCTIONS