Ersatzteilliste - Kettler FX 1 Instructions De Montage

Masquer les pouces Voir aussi pour FX 1:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 5
■ Sehen Sie sich die Zeichnungen in Ruhe an, und montieren Sie das
Gerät entsprechend der Bilderfolge. Innerhalb der einzelnen
Abbildungen ist der Montageablauf durch Großbuchstaben
vorgegeben.
■ Die Montage des Gerätes muß sorgfältig und von einer erwachsenen
Person vorgenommen werden. Nehmen Sie im Zweifelsfall die
Hilfe einer weiteren, technisch begabten Person in Anspruch.
■ Beachten Sie, dass bei jeder Benutzung von Werkzeug und bei handw-
erklichen Tätigkeiten immer eine mögliche Verletzungsgefahr
besteht. Gehen Sie daher sorgfältig und umsichtig bei der Montage
des Gerätes vor!
■ Sorgen Sie für eine gefahrenfreie Arbeitsumgebung, lassen Sie z.
B. kein Werkzeug umherliegen. Deponieren Sie z. B.
Verpackungsmaterial so, dass keine Gefahren davon ausgehen
können. Bei Folien/Kunststofftüten für Kinder Erstickungsgefahr!
■ Das für einen Montageschritt notwendige Verschraubungsmaterial
ist in der dazugehörigen Bildleiste dargestellt. Setzen Sie das

Ersatzteilliste

Geben Sie bei Ersatzteilbestellungen bitte die vollständige
Artikelnummer, die Ersatzteilnummer, die benötigte Stückzahl und
die Seriennummer des Gerätes an.
Bestellbeispiel: Art.-Nr. 07984-000 /Ersatzteil-Nr. 10100030 /2
Stück /Serien-Nr: ........
Wichtig: Zu verschraubende Ersatzteile werden grundsätzlich ohne
Verschraubungsmaterial berechnet und geliefert. Falls Bedarf an ent-
sprechendem Verschraubungsmaterial besteht, ist dieses durch
den Zusatz "mit Verschraubungsmaterial" bei der Ersatzteilbestellung
anzugeben.
Assembly Instructions
GB
Before assembling or using the exercise cycle , please read the following instructions carefully. They contain important
information for use and maintenance of the equipment as well as for your personal safety. Keep these instructions in a
safe place for maintenance purposes or for ordering spare parts.
For Your Safety
■ Exercise should be used only for its intended purpose, i.e. for
physical exercise by adult persons.
■ Any other use of the equipment is prohibited and may be dangerous.
The manufacturer cannot be held liable for damage or injury
caused by improper use of the equipment.
■ Exercise has been designed in accordance with the latest stan-
dards of safety. Any features which may have been a possible cause
of injury have been avoided or made as safe as possible.
■ Incorrect repairs and structural modifications (e.g. removal or
replacement of original parts) may endanger the safety of the user.
■ Damaged components may endanger your safety or reduce the lifetime
of the equipment. For this reason, worn or damaged parts should
be replaced immediately and the equipment taken out of use until
this has been done. Use only original KETTLER spare parts.
■ If the equipment is in regular use, check all its components thor-
oughly every 1 -2 months. Pay particular attention to the tightness
of bolts and nuts.This applies especially to the securing bolts for
saddle and handelbars.
■ To ensure that the safety level is kept to the highest possible
standard, determined by its construction, this product should be
serviced regulary (once a year) by specialist retailers.
■ Instruct persons using the equipment (in particular children) on pos-
sible sources of danger during exercising.
■ The unit requires a power supply of 220-230 V/50 Hz. It should
be connected only to a safety socket with a single 10-A fuse. Before
commissioning the appliance pay attention to the fact that the correct
plug-in power supply unit (observe marking) has been connected
properly.
■ Important: Do not under any circumstances carry out electrical repairs
Verschraubungsmaterial exakt entsprechend der Abbildungen ein.
Alles erforderliche Werkzeug finden Sie im Kleinteilebeutel.
■ Bitte verschrauben Sie zunächst alle Teile lose und kontrollieren Sie
deren richtigen Sitz. Drehen Sie die selbstsichernden Muttern bis
zum spürbaren Widerstand zuerst mit der Hand auf, anschließend
ziehen Sie sie gegen den Widerstand (Klemmsicherung) mit einem
Schraubenschlüssel
richtig
Schraubverbindungen nach dem Montageschritt auf festen Sitz.
Achtung: wieder gelöste Sicherheitsmuttern werden unbrauchbar
(Zerstörung der Klemmsicherung) und sind durch Neue zu ersetzen.
■ Zum Abziehen des Pedalarms entfernen Sie zuerst die Schutzkappe
und Schraube (A). Halten Sie den Pedalarm fest und drehen Sie
eine Schraube M12 (gehört nicht zum Lieferumfang) in die
Gewindeöffnung (B). Nach einigen Umdrehungen können Sie den
Pedalarm abnehmen (C).
■ Bewahren Sie die Originalverpackung des Gerätes gut auf, damit
sie später u. U. als Transportverpackung verwendet werden kann.
■ Aus fertigungstechnischen Gründen behalten wir uns die Vormontage
von Bauteilen (z.B. Rohrstopfen) vor.
HEINZ KETTLER GmbH & Co. KG· Postfach 1020 · D- 59463 Ense-Parsit
KETTLER Austria GmbH · Gewerbestraße 2 · A - 5322 Hof bei Salzburg
Trisport AG · Im Bösch · CH-6331 Hünenberg
http://www.kettler.net
or alterations yourself. Always ensure that such work is done by
a properly qualified electrician.
■ Important: disconnect the apparatus from the mains before doing
repair, maintenance or cleaning work.
■ Do not use a multiple power socket for the running belt. If an
extension cable is being used, ensure that it complies with the
VDE regulations.
■ When the unit is not in use, unplug it from the power supply.
■ Ensure that the power cable is not pinched and that no-one can
trip over it.
■ All electric appliances emit electromagnetic radiation when in oper-
ation. Please do not leave especially radiation-intensive appliances (e.g.
mobile telephones) directly next to the cockpit or the electronic con-
trolsystem as otherwise values displayed might be distorted (e.g. pulse
measurement).
■ Before beginning your program of exercise, consult your doctor
to ensure that you are fit enough to use the equipment. Base your
program of exercise on the advice given by your doctor. Incorrect
or excessive exercise may damage your health!
■ Any interference with parts of the product that are not described within
the manual may cause damage, or endanger the person using this
machine. Extensive repairs must only be carried out by KETTLER service
staff or qualified personnel trained by KETTLER.
■ Always observe the general safety rules and precautions for
working with electrical equipment.
■ Before beginning your program of training, study the instructions
for training carefully.
■ Our products are subject to a constant innovative quality assurance.
We reserve the right to perform technical modifications.
fest.
Kontrollieren
Sie
alle
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

07984-000

Table des Matières