Sony VPL-CH375 Guide De Référence Rapide page 51

Correcting the image twist (Corner Keystone)
You can correct the image twist by the corner keystone.
1 Press KEYSTONE on the remote commander three times, or select "Corner Keystone" in the
INSTALL SETTING menu, and select "Adjust."
2 The guide is displayed.
The corners of the image to be corrected
1 Move the s by using V/v/B/b to select the corner you want to correct.
If you press ENTER, you will go back to the cursor display.
2 Adjust the position of the corner you want to correct by using V/v/B/b.
3 The cursor will disappear if the adjustment range limit is reached.
Press the RESET key to restore the projected image before adjustment.
Adjust using this cursor.
Example of cursor display:
You can adjust in all directions.
You can adjust only to the left/
right or downwards.
Projecting an Image
21
GB