3 Return the lens shift cover to the unit.
Adjusting the tilt of the projector with the front feet (adjustable)
You can adjust the height of the projector pushing the side button on this unit.
By changing the slope of the projector with front feet (adjustable), you can adjust the position
of the projected image.
How to alter the angle
1 Push in the foot adjust button at the side of the unit.
2 Keeping the button pushed in, raise the main unit to the desired angle.
3 Release the foot adjust button.
4 For fine positioning, turn the right and left front feet (adjustable) beneath the unit.
Notes
• Be careful not to let the projector down on your fingers.
• Do not push hard on the top of the projector with the front feet (adjustable) extended. It may cause
malfunction.
Changing the aspect ratio of the projected image
Press ASPECT on the remote commander to change the aspect ratio of the projected image.
You can also change the setting in Aspect of the Screen menu.
1
3
4
2
Projecting an Image
19
GB