Dentsply Sirona Propex Pixi Manuel De L'utilisateur page 218

Guidance and Manufacturer's Declaration – Electromagnetic Immunity
The Product is intended for use in the electromagnetic environment specified below.
The customer or the user of the Product should assure that it is used in such an
environment.
Immunity test
Conducted
disturbances
induced by RF
fields
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
218/222
IEC
Compliance
60601-1-2
Test level
3 Vrms 3 Vrms
150 kHz to 150 kHz to
80 MHz 80 MHz
6 Vrms in 6 Vrms in
ISM bands ISM bands
150 kHz to 150 kHz to
80 MHz 80 MHz
80% AM at 80% AM at
1 kHz 1 kHz
10 V/m 10 V/m
80 MHz to
2.7 GHz
Electromagnetic environment -
level
Portable and mobile RF
communications equipment should
be used no closer to any part of
the Product, including cables, than
the recommended separation
distance calculated from the
equation applicable to the
frequency of the transmitter.
Recommended separation
distance:
from 150 kHz to 80 MHz
from 80 MHz to 800 MHz
from 800 MHz to 2.7 GHz
Where P is the maximum output
power rating of the transmitter in
watts (W) according to the
transmitter manufacturer and d is
the recommended separation
distance in meters (m).
END-IFU-PROPEX-PIXI-V15- WEB-EUR-Multilingual -2020-11
guidance
d = 1.17 P

d = 1.17 P

d = 2.3 P
