Sliding Body Shelves With Rear Hangers; Butter & Cheese Section; Using The Water Spring; Spillage Tray - Blomberg KQD 1360X Notice D'utilisation

Masquer les pouces Voir aussi pour KQD 1360X:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 60
Sliding Body Shelves With
Rear Hangers

Sliding body shelves with rear hangers

can be moved back and forth. Height
of these shelves can be adjusted by
removing and then installing them to
upper or lower positions. Raise the shelf
up slightly and pull towards yourself to
remove it.
Butter & Cheese Section
You can store food such as butter,
cheese, and margarine in this section
which has a lid.

Using the water spring

Warnings
It is normal for the first few glasses of water
taken from the dispenser to be warm.
In cases where the water dispenser has not
been used frequently, sufficient amount of
water must be drained from the dispenser
to get fresh water.

Spillage Tray

Water drops that drip during use,
accumulates in the spillage tray. You can
remove spillage tray by pulling it to yourself
or pressing on its edge (depending on the
model). You can remove the water with a
sponge or a soft cloth.
24
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kqd 1360eKqd 1360 x a+Kqd 1360 e a+

Table des Matières