Wiring Connection - Kenwood KMM-BT332 Mode D'emploi

Installation/Connection

Wiring connection

IMPORTANT
We recommend installing the unit with a commercially
available custom wiring harness specific for your car and
leave this job to professionals for your safety. Consult your
car audio dealer.
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Car fuse box
Ignition switch
Car fuse
box
Battery
To the metallic body or chassis of the car
30
ENGLISH
Fuse (10 A)
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
If no connections are made, do not let the wire come out from the tab.
Brown
(Mute control wire)
Blue/White
(Power control wire/
Antenna control wire)
(12 V 350 mA)
Light blue/yellow
(Steering remote control wire)
Antenna terminal
Connect to the device equipped with muting feature to
mute this unit
To the power control terminal when using the optional
power amplifier or to the antenna control terminal in the
vehicle
For / /
To the steering wheel remote control adapter
For : To KENWOOD Marine Remote
Control unit (optional accessory) (Page 7)
For the latest information on marine accessories, visit
<https://www.kenwood.com/usa/car/marine/>
: