Usb/Ipod; Connect A Usb Device - Kenwood KMM-BT332 Mode D'emploi

Radio
[TI] [ON]: Allows the unit to temporarily switch to Traffic Information if
available ("TI" indicator lights up) while listening to all sources except in
AM. ; [OFF]: Cancels.
[PTY SEARCH]
For
Select the available Program Type (for Radio Broadcast Data System, see
page 32), then press S / T to start.
For
1 Turn the volume knob to select the available Program Type (for Radio
Data System, see page 32), then press the knob.
2 Turn the volume knob to select the PTY language ([ENGLISH]/
[FRENCH]/[GERMAN]), then press the knob.
3 Press S / T to start searching.
[CLOCK]
[TIME SYNC] [ON]: Synchronizes the unit's time to the Radio Broadcast Data System/
Radio Data System station time. ; [OFF]: Cancels.
• [MONO SET]/[NEWS SET]/[REGIONAL]/[AF SET]/[TI]/[PTY SEARCH] is selectable only
when the band is FM1/FM2/FM3.
• If the volume is adjusted during reception of traffic information, alarm or
news bulletin, the adjusted volume is memorized automatically. It will be
applied the next time traffic information, alarm or news bulletin is turned
on.
/ / :
:

USB/iPod

Connect a USB device

USB input terminal
USB type A cable*1
(general products)
The source changes to USB automatically and playback starts.
Connect an iPod/iPhone
USB input terminal
KCA-iP103*2 (optional accessory)
or accessory of the iPod/iPhone*1
The source changes to iPod USB automatically and playback starts.
• You can also connect iPod/iPhone via Bluetooth. (Page 17)
*1 Do not leave the cable inside the car when not in use.
*2 KCA-iP103: Lightning type
USB device
iPod/
iPhone
9
ENGLISH