Cd/Usb/Ipod; Volume Knob; Analog Radio - Kenwood KDC-DAB43U Guide De Démarrage Rapide

CD/USB/iPod

Volume knob

Playing a disc
Insert a disc in the Disc slot.
Playback starts automatically.
Playing a USB device or iPod
Connect a USB device or iPod to the
USB terminal.
The source automatically switches, and
playback starts.
Selecting a Song
Press [E] or [F].
Selecting an audio file folder
Press [1 –] or [2 +].
Fast-forwarding or fast-backwarding
a Song
Press and hold [E] or [F].
Pause and play
Press [6 L].
Selecting App & iPod Control Mode
Press [5 iPod] repeatedly to select the
control mode.
MODE ON : From the iPod *. "APP&iPod"
appears on the display.
MODE OFF : From the unit.
* You can still select an audio file, play/
pause and fast-forward/fast- reverse a
song of audio file in the iPod from the
unit.
4 | Quick Start Guide
Disc slot
USB terminal
Music Search
1
Press [ 1 ] to enter Music Search
mode.
2
Turn the volume knob to select a
folder/ track/ file, then press the
knob.
– To skip songs, press [E]/ [F].
Holding [E]/ [F] for 3 seconds or
longer skips songs at 10% regardless of
the selected skip ratio.
This operation is effective only for the
iPod, KME-Light/ KMC media.
– To return to the root folder (audio
file), top menu (iPod, KME-Light/ KMC
media) or first track (audio CD), press [5].
– To return to the previous folder, press
[ 6 ].
To cancel the Music search mode
Press and hold [ 6 ].
Removing the disc
Press [G] to eject a disc.
Removing the USB device or iPod
1
Press [8SRC] to select a source other
than "USB" or "iPod".
2
Remove the USB device or iPod.

Analog Radio

Volume knob
Search for a service
1
Press [8SRC] to select TUNER .
2
Press [ 1 ] repeatedly to select a
band (FM1, FM2, FM3, MW/LW).
3
Press [E] / [F] to select a station.
– The tuning mode can be changed. Refer
to <SEEK MODE> (page 4).
Station Preset Memory
Press and hold [1] to [6] to memorize
the current station.
Recall the stations in the memory
Press [1] to [6] to recall memorized
station.
Changing the analog radio settings
1
Press the volume knob to enter
Function mode.
2
Turn the volume knob to select
SETTINGS , then press the knob.
3
Turn the volume knob to select a
desired setting item, then press the
knob.
See table below for selection.
4
Press and hold [ ] to exit.
Item Selectable setting (Preset: *)
SEEK AUTO1 *: Automatically search for a station.
MODE ; AUTO2: Search in the order of the stations
in the preset memory. ; MANUAL: Manually
search for a station.
AUTO YES: Automatically starts memorizing 6
MEMORY stations with good reception. ; NO: Disables
automatic memorization.
MONO SET ON: Improves the FM reception (but the stereo
effect may be lost). ; OFF *: Does not improve
FM reception but resumes stereo effect.
(Not applicable if "MW/LW" is selected)
TI ON *: Temporarily switches to Traffic
Information. ;
OFF: Does not switch to Traffic information
(Not applicable if "MW/LW" is selected)
• For details, see the Instruction Manual.