Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Getting Started
[F/W UPDATE]
[UPDATE SYSTEM]
[F/W UP xxxx]
[YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<https://www.kenwood.com/cs/ce/>.
• Once you have upgraded the firmware, you are unable to downgrade
the firmware.
[FACTORY RESET]
[YES]: Resets the settings to default (except the stored station). ;
[NO]: Cancels.
[ENGLISH]
Select the display language for [FUNCTION] menu and music
[ESPANOL]
information if applicable.
By default, [ENGLISH] is selected.
[FRANCAIS]
Register the marine remote ID
Applicable only when you connect KENWOOD Marine Remote Control unit
(KCA-RC55MR, optional accessory) to this unit.
• For connection, see "Connect external components" on page 29.
• Refer also to the supplied instruction manual of the KENWOOD Marine
Remote Control unit for more information.

Preparation:

Press B SRC repeatedly to enter STANDBY, then press the volume knob to
enter [FUNCTION].
(for
)
1
Turn the volume knob to select an item, then press the knob.
[SYSTEM]
[REM SETTING]
[REMOTE ID SET]
Remote control ID list is displayed.
• [YES] indicates that this ID is already registered.
• [NO] indicates that this ID is available.
2
Turn the volume knob to select an available ID [REM ID1]/[REM ID2]/
[REM ID3], then press the knob.
"REGISTERING" appears on the display window.
To register, on the KENWOOD Marine Remote Control unit:
• Press ENTER to register as [REM ID1].
• Press SRC to register as [REM ID2].
• Press DISP to register as [REM ID3].
Once the ID is registered, "COMPLETED" appears.
To delete the registered ID
1
Turn the volume knob to select an item, then press the knob.
[SYSTEM]
[REM SETTING]
[REMOTE ID DEL]
2
Turn the volume knob to select the ID to delete [ID1 DELETE]/[ID2 DELETE]/
[ID3 DELETE], then press the knob.
3
Turn the volume knob to select [YES] to delete the selected ID, and
select [NO] to cancel.
• To exit, press and hold
.
• To return to the previous setting item, press
.
7
ENGLISH

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kmm-bt270uKmm-bt232uKmm-m332bt

Table des Matières