Ryobi RPW140H Mode D'emploi page 15

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME
Safety Alert
Volts
V
Amperes
A
Hertz
Hz
Watt
W
Minutes
min
Alternating Current
~
No Load Speed
n
o
Per Minute
.../min
Wet Conditions Alert
Read The Operator's
Manual
Eye Protection
Risk of Injection
Kickback
Electric Shock
Do not connect to
drinking water supply
without backflow
preventer
Risk of Injury
No Lift
No Hands
English(Original instructions)
SYMBOLS
DESIGNATION/EXPLANATION
Indicates a potential personal injury hazard.
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Always wear safety goggles or safety glasses with side shields and,
as necessary, a full face shield when operating this product.
To reduce the risk of injection or injury, never direct a water stream
towards people or pets or place any body part in the stream. Leak-
ing hoses and fittings are also capable of causing injection injury.
Do not hold hoses or fittings.
To reduce the risk of injury from kickback, hold the spray lance
securely with both hands when the machine is on.
Failure to use in dry conditions and to observe safe practices can
result in electric shock.
Appliance not suitable for connection to the drinking water mains
without backflow preventer.
Warning! Never point the gun to human, animals, the machine body,
power supply or any electric appliances.
Only use cleaning deck on flat, horizontal surfaces. Never lift
cleaning deck from the cleaning surface while operating the
pressure washer.
Keep hands and feet away from the cleaning deck while the
pressure washer is running.
13