Changing The Activated Carbon Filter - Beem Fresh-Aroma-Perfect Mode D'emploi

Changing the activated carbon filter

Change the activated carbon filter after brewing 70 times or when
the
follows:
Press the
‹
reminder. The
Place the new filter in the filter container and close the filter
‹
container flap.
Slide the filter holder (15) into the recess (arrow).
‹
Press the
‹
again.
NOTE
►
BEEM - Elements of Lifestyle
symbol starts flashing in the display. Please proceed as
button (29) to switch off the filter change
symbol on the display goes out.
‹
‹
button (29) to activate the filter change reminder
The filter change reminder is active only when
in the display is not flashing.
Cleaning and maintenance
Take the filter holder (15) from the
water tank (13) and open the filter
container flap and remove the used
activated carbon filter.
Remove the activated carbon
filter (16) from its plastic packaging
and thoroughly rinse under running
water in order to remove any potential
production residues.
EN
symbol
65