Know Your Product - Ryobi R4SDP Traduction Des Instructions Originales

RISK REDUCTION
It has been reported that vibrations
from handheld tools may contribute to a
condition called Raynaud's Syndrome
in certain individuals. Symptoms
may include tingling, numbness,
and blanching of the fingers, usually
apparent upon exposure to cold.
Hereditary factors, exposure to cold
and dampness, diet, smoking, and work
practices are all thought to contribute
to the development of these symptoms.
There are measures that can be taken
by the operator to possibly reduce the
effects of vibration:
■
Keep your body warm in cold weather.
When operating the unit, wear gloves
to keep the hands and wrists warm.
It is reported that cold weather is a
major factor contributing to Raynaud's
Syndrome.
■
After each period of operation,
exercise to increase blood circulation.
■
Take frequent work breaks. Limit the
amount of exposure per day.
If you experience any of the symptoms
of this condition, immediately discontinue
use and see your doctor about these
symptoms.
WARNING
Injuries may be caused, or aggravated,
by prolonged use of a tool. When using
any tool for prolonged periods, ensure
you take regular breaks.

KNOW YOUR PRODUCT

See page 131.
1. Collet
2. Two-speed gear train
3. Pivot locking button
4. Direction of rotation selector
5. Single bit(25 mm)
6. Switch trigger
7. Charger
8. Charger plug
9. Input jack
MAINTENANCE
WARNING
The product should never be
connected to a power supply when
assembling parts, making adjustments,
cleaning, performing maintenance,
or when the product is not in use.
Disconnecting the product will prevent
accidental starting that could cause
serious injury.
■
When servicing, use only identical
replacement parts. Use of any other
parts may create a hazard or cause
product damage.
■
Avoid using solvents when cleaning
plastic parts. Most plastics are
susceptible to various types of
commercial solvents and may be
damaged by their use. Use clean
cloths to remove dirt and carbon dust.
■
Do not, at any time, let brake fluids,
gasoline, petroleum-based products,
penetrating oils, etc., come in contact
with plastic parts. They contain
chemicals that can damage, weaken,
or destroy plastic.
■
Always wear safety goggles or safety
glasses with side shields during power
tool operation or when blowing dust.
If operation is dusty, also wear a dust
mask.
■
For greater safety and reliability, all
repairs should be performed by an
authorised service centre.
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
EL
TR
UK
English | 3