On The Remote Control - Sony MZ-R90 Mode D'emploi

On the remote control

VOL +/–
Labeling a disc during stop
1
Insert a disc.
To label a disc that is already in the
recorder, press x to stop.
2
Press DISPLAY for 2 seconds or
more.
" : Name" flashes in the display.
3
Press x.
The disc is ready to be labeled.
4
Press the control towards . or
towards N • > to select a letter
and press x to enter.
The selected letter stops flashing and
the cursor moves to the next input
position.
Press/ Turn
X
VOL +/–
./
N • >
36
-GB
DISPLAY
PLAYMODE
X
Control
x
To
Switch between
capital letters,
small letters,
marks / numbers,
1)
and phrases.
Move the cursor to
the left or right.
Change the letter to
the one before /
next one.
Press/ Turn
DISPLAY
PLAYMODE
1)
If phrases are stored in the phrase bank,
the first phrase stored appears in the
display(page 39).
5
Repeat step 4 and enter all characters
of the label name.
To cancel labeling, press DISPLAY
for 2 seconds or more.
6
Keep pressing the x for 2 seconds or
more.
The track or disc is labeled.
Labeling a track during
playback
1
Insert a disc and play the track you
want to label.
2
Press DISPLAY for 2 seconds or
more.
" : Name" flashes in the display.
3
Press x.
The track is ready to be labeled.
4
Follow steps 4 to 6 of "Labeling a
disc during stop" (page 36).
Labeling a track or a disc
during recording
1
Press DISPLAY for 2 seconds or
more during recording.
" : Name" flashes in the display.
To
Insert a blank space
to type in a new
letter by pressing
within 2 seconds.
Cancel labeling by
pressing for 2
seconds or more.
Delete a letter and
move back all
following letters to
the left.