Included Items; Technical Details; Noise And Vibration Data - Parkside PGG 15 A1 Instructions D'utilisation Et Consignes De Sécurité

Introduction
Engraving point holder
6
Engraving stencils
7

Included items

1 Power engraving tool PGG 15 A1
2 Engraving stencils
1 Operating instructions

Technical details

Rated voltage:
Mode of operation:
Note: A duty cycle (in %) defines explicitly the maximum continuous
duration of use and the subsequent rest period. In this case the tool
requires a cooling phase of eight minutes after an operating period of
two minutes, for example.
Rated current:
Stroke rate:

Noise and vibration data:

Measured values for noise are determined in accordance with
EN 60745. The A-weighted noise level of the electrical power tool
are typically:
Sound pressure level: 74.4 dB(A)
Sound power level:
Uncertainty K:
56 GB
230 V∼ 50 Hz
intermittent operation: S3 20 %
0.15 A
6000 min
-1
85.4 dB(A)
3 dB