AFG 3.3AE Manuel Du Propriétaire page 11

ASSEMBLY STEP 10
(7.3AE)
7.3AE
22
21
11
20
AFG14_3.3AE_5.3AE_7.3AE_OM_r1_4.indd 20-21
If you would like to use the elliptical without the
UPPER HANDLEBARS (19), you can install the
HANDLEBAR COVERS (21) instead.
19
NOTE: All hardware for this step is included in the
18 plastic bag with the HANDLEBAR COVERS.
A If the UPPER HANDLEBARS (19) are
20
already installed, remove the PRE-
INSTALLED SCREWS (20) and slide
off the UPPER HANDLEBARS (19) and
HANDLEBAR BOOTS (18) from the LOWER
HANDLEBARS (11).
B Remove 2 HANDLEBAR COVERS (21) and
SCREWS (22) from plastic bag.
C Place HANDLEBAR COVERS (21) over the
LOWER HANDLEBARS (11) and attach using
2 included SCREWS (22).
ELLIPTICAL OPERATION
This section explains how to use your elliptical's console and programming.
The BASIC OPERATION section in the ELLIPTICAL GUIDE has instructions for the following:
• LOCATION OF THE ELLIPTICAL
• POWER/GROUNDING INSTRUCTIONS
• FOOT POSITIONING
• MOVING THE ELLIPTICAL
• LEVELING THE ELLIPTICAL
• POWER/MANUAL INCLINE OPERATION
• USING THE HEART RATE FUNCTION
21
5/20/14 9:12 AM