Publicité
Les langues disponibles
Les langues disponibles
Date setting
16 | 17
If a month has fewer than 31 days, you will need to set the date manually
to the first day of the following month. Pull the crown out to position 1.
You can now set the date by turning the crown to the right (rapid advance).
You should not use the rapid advance function between 8 pm and 2 am
because the movement automatically advances the date during this period.
Time setting
Pull the crown out to position 2. This will stop the movement. To set the time
accurately to the second, it is best to stop the movement as the seconds
hand passes over 60. Now move the minute hand a few minutes beyond the
time to which you wish to set the watch. Then position the minute hand
by moving it gently backwards until it is directly above the correct minute
stroke. This ensures that the minute hand begins to move immediately when
you restart the movement. To start the seconds hand, push in the crown to
position 0. When setting the time, please be aware of the date change, which
always takes place at 12 midnight. If this change has already taken place at
12 noon, you must move the hands forward by 12 hours.
Publicité
