Power Supply - Jay Electronique Jump Notice D'installation Et D'utilisation

5.2- Power supply

The Jump repeater comes in 2 versions :
- a «battery» version (internal battery, ref: PWB)
- a «fi xed power supply» version (supplied by M12 connector)
With the « battery » version, an ON/OFF pushbutton is provided to switch on
and off the repeater. When the repeater is switched off, the battery is charged
by a supply cable on the M12 connector.
Reminder : Do not charge the battery when the Jump repeater is
operating (may degrade radio performance).
Jump
«Battery» version
Battery PWB
Jump
«fixed power supply» version
FR EN
- 42 -
CHARGE
ERROR
LD1
LD5
CONFIG
ERROR
n
LD5
CONFIG
ERROR
DE
LD4
TENS UNITS LD3
LD2
B
A
CONFIGURATION CONFIGURATION
LD4
LD3
TENS UNITS
LD2
B
A
CONFIGURATION CONFIGURATION
ON/OFF button
= Jump repeater off.
OFF
(Internal battery charged by
cable on M12 connector)
ON
= Jump repeater supplied by
internal battery
(Battery charging must be
stopped)
M12 Connector
0v
(black)
9-28Vdc
(brown)
M12 Connector
0v
(black)
9-28Vdc
(brown)
Jump - 332970C
revision 03