Overview Of Jump Radio Repeater - Jay Electronique Jump Notice D'installation Et D'utilisation

2 - Overview of Jump radio repeater

Thank you for choosing our Jump secure active radio repeater.
The Jump radio repeater is designed for use with the following series of JAY Electronique
industrial radio remote controls :
- UD, UC, UR, RS (64 possible frequencies, 433-434MHz bands)
The Jump repeater is implemented to ensure the highest level of safety of the product line in
which it is integrated.
The Jump radio repeater integrates the following safety concepts (for each radio «Transmitter
/ Receiver» pair) :
- SIL 3 per EN 61508
- PL e per EN 13849-1
when used with following Transmitter / Receiver pairs :
Transmitter URE / Receiver RSRA
Transmitter RSEF4x-0 / Receiver RSRA
Emetteur RSEP40-x / Récepteur RSRBx4xx-x
Emetteur RSEP41-x / Récepteur RSRBx4xx-x
Emetteur RSEP4A-x / Récepteur RSRBx4xx-x
Emetteur RSEP4B-x / Récepteur RSRBx4xx-x
Emetteur RSEP40-x / Récepteur RSRC4xx-xx
Emetteur RSEP41-x / Récepteur RSRC4xx-xx
Emetteur RSEP4A-x / Récepteur RSRC4xx-xx
Emetteur RSEP4B-x / Récepteur RSRC4xx-xx
- SIL 2 per EN 61508
- PL d per EN 13849-1
when used with following Transmitter / Receiver pairs :
Transmitter UCE / Receiver UCR
Transmitter UDE / Receiver UDR
Transmitter URE / Receiver URR
For any recommendations or questions concerning installation of the
Jump radio repeater, contact us at our customer service department
(Monday to Friday).
Tel : +33.(0)4.76.41.44.00
Fax : +33.(0)4.76.41.44.44
Email : customer.service@jay-electronique.com
FR EN
- 32 -
DE
Jump - 332970C
revision 03