1- Confi Guration Of Radio Channel - Jay Electronique Jump Notice D'installation Et D'utilisation

4.2.1- Confi guration of radio channel
The Jump repeater radio channel (reception) must be confi gured to the
same channel used by the radio control system.
IMPORTANT : each repeater Jump operating nearby must be absolutely
!
confi gured with a different radio frequency channel.
For the UD, UC, UR and RS series, 64 radio channels are available in the
433-434MHz band (see list of frequencies on next page).
If a radio channel is programmed outside the range of possible channels,
the programming error is indicated by the red indicator light LD5.
The radio channel is confi gured using the two thumbwheels :
Jump
(«Battery» version shown)
Example 1 :
Radio channel nb. 8
TENS
A
FR EN
- 36 -
CHARGE
ERROR
LD1
LD5
CONFIG
ERROR
Example 2 :
Radio channel nb. 63
UNITS TENS
B A
DE
LD4
TENS UNITS LD3
LD2
B
A
CONFIGURATION CONFIGURATION
Example 3 : Programming error
UNITS TENS
B A
TENS UNITS
A
Radio channel nb. 65
UNITS
B
Jump - 332970C
B
CONFIG
ERROR
LD5
revision 03