Ventilation; Material Selection - RAIS 900 Manuel D'utilisation

English RAIS - manual for RAIS 900
Convection
RAIS stoves are convection stoves. Convection means that there is a circulation of air,
which ensures that the heat is distributed more evenly throughout the entire room. The
cold air
is sucked in at the base of the stove up through the convection channel, which
runs along the stove's combustion chamber. The heated air pours out at the top of the
stove, which ensures a circulation of warm air throughout the room.
Ventilation - use the insert optimally
By installing hot air nozzles and flexible hoses (or similar) on top of the stove, it is possible
to "move" the heat to other rooms.
Consider the placement of convection and outlet holes. Ensure that the area requirements
are respected and that the holes are not blocked from the outside. There may be disco-
loration of the wall above the stove doors, and above the convection outlet holes. This is
due to the ascending hot air.
RAIS accepts no liability for installation or consequential damages.

Material selection

Choose materials for panels/bricks with a thermal
resistance greater than 0.03 m xK/W.
2
Thermal resistance is defined as the thickness (in m)
divided by the wall's lambda value.
Consult with your installer/chimney sweep.
35