Qualification Of Operating And Specialist Personnel; Personal Protective Equipment - Rohm DURO-M Traduction Du Manuel D'utilisation Original

2 | Safety
2.4

Qualification of Operating and Specialist Personnel

Definition of "skilled worker"
A person is designated as a skilled worker when they can assess the work
assigned to them and identify possible dangers based on their specialist
training, knowledge and experience. They also have knowledge of the relev-
ant provisions. This refers only to trained specialist personnel or such per-
sonnel that the operator has found to be capable.
Definition of "trained/instructed person"
A trained/instructed person is someone who has been taught about, and if
necessary trained in, the tasks assigned to them and about the possible
dangers of improper conduct. They have also been taught about the neces-
sary safety equipment and protective measures. Personnel to be taught,
trained, instructed or personnel undergoing general training may only work
under the constant supervision of an experienced person.
2.5

Personal protective equipment

When working on and with the Lathe chuck, personal protective equipment
must be worn.
▪ Personal protective equipment must be in perfect condition when carry-
ing out work. Defective protective equipment is to be replaced immedi-
ately.
▪ Observe information about personal protective equipment posted in the
working area around the machine.
Wear safety goggles
Wear protective gloves
Wear safety shoes
Wear protective clothing
NOTICE:
Persons with long hair must wear a hair-net when working with the Lathe
chuck.
Wear ear protection
70 / 280 B1385260 DURO-M