Technical Data; Before Putting The Machine Into Operation - EINHELL BT-TS 2031 Z Mode D'emploi D'origine

Anleitung_BT_TS_2031_Z_SPK1:_
GB
regulations in force in your area. The same applies
for the general rules of health and safety at work.
The manufacturer shall not be liable for any changes
made to the machine nor for any damage resulting
from such changes.
Even when the machine is used as prescribed it is
still impossible to eliminate certain residual risk
factors. The following hazards may arise in
connection with the machineʼs construction and
design:
Contact with the saw blade in the uncovered
saw zone.
Reaching into the running saw blade (cut
injuries).
Kick-back of workpieces and parts of work-
pieces.
Saw blade fracturing.
Catapulting of faulty carbide tips from the saw
blade.
Damage to hearing if ear-muffs are not used as
necessary.
Harmful emissions of wood dust when used in
closed rooms.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

5. Technical data

AC motor
Power P S1 1200 W S6 20% 2000 W
Idle speed n
0
Carbide saw blade
Number of teeth
Bench size
Cutting height max.
Height adjustment
Tilting saw blade
Extractor socket
Weight
Operating mode S6 20%: Continuous operation with
idling (cycle time 10 minutes). To ensure that the
motor does not become excessively hot, it may only
be operated for 20% of the cycle at the specified
rating and must then be allowed to idle for 80% of the
cycle.
18
21.09.2010 8:07 Uhr
Sound and vibration
Sound and vibration values were measured in
accordance with EN 61029.
Sound pressure level L
K uncertainty
pA
Sound power level L
K
WA
The quoted values are emission values and not
necessarily reliable workplace values. Although there
is a correlation between emission and immission
levels it is impossible to draw any certain conclusions
as to the need for additional precautions. Factors
with a potential influence on the actual immission
level at the workplace include the duration of impact,
the type of room, and other sources of noise etc.,
e.g. the number of machines and other neighboring
operations. Reliable workplace values may also vary
from country to country. With this information the
user should at least be able to make a better
assessment of the dangers and risks involved.
Wear ear-muffs.
The impact of noise can cause damage to hearing.
„Keep the noise emissions and vibrations to a
minimum.
Only use appliances which are in perfect working
order.
Service and clean the appliance regularly.
Adapt your working style to suit the appliance.
230 V 50Hz
Do not overload the appliance.
Have the appliance serviced whenever
necessary.
2800 min -1
Switch the appliance off when it is not in use.
Ø 315 x Ø 30 x 3.6 mm
24
800 x 550 mm 6. Before putting the machine into
83 mm/0° operation
60 mm / 45°
Unpack the bench-type circular saw and check it
infinite 0 -83 mm
for damage which may have occurred in transit.
infinite 0° - 45°
The machine has to be set up where it can stand
Ø 100 mm
firmly, e.g. on a work bench, or it must be bolted
to a strong base.
52 kg
All covers and safety devices have to be
properly fitted before the machine is switched
on.
It must be possible for the saw blade to run
freely.
When working with wood that has been
processed before, watch out for foreign bodies
Seite 18
operation
92,9 dB(A) 82,9 dB(A)
pA
103,5 dB(A) 93,7 dB(A)
WA
uncertainty
mode
4 dB
4 dB