Service And Maintenance; Accessories; Environment - Festool ETS EC 125/3 EQ Notice D'utilisation D'origine

Sanding work
– Sanding with max. abrasion
– Sanding off old paint
– Sanding of wood and veneered sur­
face prior to paintwork
– Intermediate sanding of paintwork on
surfaces
– Sanding thinly applied undercoat
– Sanding wood with sanding cloth
– Edge breaking on wooden parts
– Smoothing primed wooden surfaces
– Sanding solid wood and veneered
edges
– Sanding rebate of windows and doors
– Intermediate sanding of paintwork at
edges
– Light sanding of natural wood win­
dows using sanding cloth
– Smoothing wooden surfaces using
sanding cloth before staining
– Rubbing stained surfaces with a
sanding cloth
– Rubbing or removing excess lime­
stone residue using sanding cloth
– Intermediate sanding of paintwork on
stained surfaces
– Cleaning natural wood window re­
bate using sanding cloth
– Sanding stained edges
– Sanding thermoplastics
9

Service and maintenance

WARNING
Risk of injury, electric shock
► Always pull the mains plug from the socket
before performing any servicing and main­
tenance work.
► All maintenance and repair work which re­
quires the motor housing to be opened
should always be carried out by an author­
ised service workshop.
WARNING
Incorrect testing may damage the machine
and injure users
► Special information is required for testing
the electrical safety. This is available from
your country's Festool service workshop.
Adjusting wheel set­
ting
5–6
4–5
3–4
2–3
1–2
Customer service and repairs must
only be carried out by the manufac­
turer or service workshops. Find the
nearest address at:
www.festool.co.uk/service
Always use original Festool spare
EKAT
4
parts. Order no. at:
www.festool.co.uk/service
5
3
2
1
To ensure constant air circulation, always keep
the cooling air openings in the motor housing
clean and free of blockages.
In the event of a slowdown in performance or
increased vibrations, blow and clean cooling air
openings.
9.1 Cleaning the extraction channels
We recommend cleaning the extraction chan­
nels in the machine [4-1] roughly once a week
(particularly if sanding synthetic resin, in the
case of wet sanding and if sanding plaster) us­
ing a small flat brush or a cloth.
9.2 Cleaning the inside of the power tool
Regularly clean the inside of the power tool at
the bottom of the fan, [4-3] otherwise the vibra­
tion values worsen as a result of the dust accu­
mulation.
9.3 Replace the sanding pad and sanding
pad brake
The rubber sleeve [4-2] brushes off the sanding
pad and prevents uncontrolled turning of the
sanding pad. The sanding pad brake is almost
wear-free thanks to the pins used.
In the case of a decreasing braking effect, first
check the sanding pad for wear and replace it if
necessary. Replace the damaged sanding pad
brake/rubber sleeve.

10 Accessories

Only use original Festool sanding and polishing
pads. Low-quality sanding and polishing pads
may cause serious machine imbalance that de­
creases the quality of the working results and
increases machine wear.
The PO numbers of the accessories and filters
can be found in the Festool catalogue or on the
Internet at "www.festool.co.uk".

11 Environment

Do not dispose of the device in the
household waste! Recycle devices, ac­
cessories and packaging. Observe appli­
cable national regulations.
English
17