Festo SPC200 Série Mode D'emploi page 13

3 Fitting
The control panel type SPC200-MMI-1F is intended for
fitting onto a front plate. For fastening, you will require a
space of approx. 114 x 102 x 70 mm and a cut-out section
of approx. 92 x 92 mm. The front plate must not be thicker
than 4 mm.
The following diagram shows the appropriate dimensions.
1
1
Control panel (side view)
2
Control panel (rear view)
Festo SPC200-MMI-1F 0012NH English
2
3
Fastening hooks (included in
delivery)
3
13