Festo SPC200 Série Mode D'emploi page 11

1 Notes on useEnglish
The control panel type SPC200-MMI-1F has been designed
for commissioning, programming, diagnosing and operat-
ing the SPC200 Smart Positioning Controller with operat-
ing system from version 3.72. The control panel is in-
tended for mounting on the front plate.
Detailed information on operating the SPC200 with the
control panel can be found in the user manual
P.BE-SPC200-... .
Caution
Pay strict attention to the following instructions in the
manual:
– The safety guidelines
– The designated use of the individual components
and modules.
Warning
Actuators can be unintentionally activated and both the
SPC200 and the control panel can be damaged if con-
tacts are connected or disconnected when the power
supply is switched on.
Before undertaking installation and/or maintenance
work, switch off the following sources of power in the
sequence specified:
1. The compressed air supply
2. The power supply
Festo SPC200-MMI-1F 0012NH English 11