Cardin Elettronica SL Série Mode D'emploi page 57

4c) Limited opening
• Press PROG/OK to scroll between the available choices:
- 1 meter; 2 meters; 3 meters; 4 meters; 5 meters; 6 meters; 7 meters; 8 meters; 9 meters.
• Press the arrow button
next parameter.
Limited opening allowing pedestrian access (TAL button). The limited opening command can also be imparted
remotely using a radio control button.
4c) Limited opening
• Press PROG/OK to scroll between the available choices:
- Selection 1 = 1/3 travel distance of gate 1; Selection 2 = 1/2 travel distance of gate 1
- Selection 3 = 2/3 travel distance of gate 1; Selection 4 = complete travel distance of gate 1
• Press the arrow button
next parameter.
Limited opening allowing pedestrian access (TAL button). The limited opening command can also be imparted
remotely using a radio control button.
4d) Distance from the closing travel limit
• Press PROG/OK to scroll between the available choices:
- 0 steps; 1 step; 2 steps (default setting); 3 steps; 4 steps; 5 steps; 6 steps; 7 steps; 8 steps; 9 steps
• Press the arrow button
choice and move to the next parameter.
Setting the distance from the closing travel limit (encoder count). Once the opening and closing mechanical
travel limits have been detected the programmer will apply this correction in order to prevent the sliding gate
from colliding into the mechanical travel limits after every work cycle.
to confirm. The programmer will save the choice and move to the
to confirm. The programmer will save the choice and move to the
to confirm the choice eg. 2 steps; The programmer will save the
57
4c) Limited opening
MOTOR SELECTION
SLX3024 3000kg
CURRENT SENSOR
LEVEL 1
LIMITED OPENING
2 METERS
4c) Limited opening
MOTOR SELECTION
BL3924MCB
CURRENT SENSOR
LEVEL 1
LIMITED OPENING
SELECTION 1
4d) Distance from close
CURRENT SENSOR
LEVEL 2
LIMITED OPENING
3 METERS
DIST. FROM CLOSE
2 STEPS