Ergon CF3 Pro Carbon Instructions D'installation Et D'utilisation page 60

60
EN
Undo and remove the lock screw and washer. (Fig. C). Clean and recoat the
CF3 Pro Carbon's two leaf springs with carbon paste (see details on page 46).
Coat the supplied Anti-Slip Shim with a little carbon paste on the unprinted side.
(Fig. D). Use the additional carbon paste as supplied with the one Anti-Slip Shim
as required.
Fig. C: Remove the lock screw and washer. Fig. D: Use carbon paste on the indicated
surfaces.
b