Adjusting The Seatpost Extension - Ergon CF3 Pro Carbon Instructions D'installation Et D'utilisation

ERGON BIKE ERGONOMICS

Adjusting the seatpost extension

Push the CF3 seat post using minimal twisting into the seat tube of the frame
(Fig. A). Set the saddle to the same height as you currently use. Note when
doing this the imprinted marking of the minimum extension (see warnings on
page 8) (Fig. B). Bear in mind that the CF3 seat post already provides a small
amount of springiness when it is sat on. For that reason add a total of 5 mm to
the seat height for the first approximation. For tips on adjusting seatpost
extension, see page 65. You may need to test ride the bike to set the final saddle
height.
Twist minimally so as
to avoid scoring and
damaging the post.
Fig. A: Use very minimal twisting motions to fit
the seatpost into the frame.
Min
1
2
3
4
5
6
7
8
9
Max
Max Weight
100 kg
Length
Fig. B: The seatpost is marked as above to
330 mm
Setback
+10 mm/
show the Minimum and Maximum Extension.
-2 mm
Ø
27,2 mm
S14-13
Back
Minimum extension
Possible extension
Maximum extension
51
EN