Fastening In The Frame - Ergon CF3 Pro Carbon Instructions D'installation Et D'utilisation

52
EN

Fastening in the frame

Once the correct extension for the seatpost has been determined, align the
saddle straight to the frame using the saddle nose and the down tube or top
tube as references. Tighten up the screw of the seat post clamp using a torque
wrench to the tightening torque specified by the frame maker. Do not exceed the
maximum tightening torque of 7 Nm for the CF3 seat post regardless of the
frame makers torque (Fig. A). If you need to adjust the seatpost extension at a
future date, please ensure that you follow the instructions in this manual.
max. 7 Nm
Fig. A: Tightening the seatpost clamping screw