Lenz Digital plus SILVERmini+ Mode D'emploi page 35

0-255 Maximum speed
5
0-255 Mid speed Vmid
6
-
7 Version number
8 - Manufacturer's ID
9 0-63 Repeat rate
192-231 Extended locomotive address, high-order byte
17
0-255 Extended locomotive address, low-order byte
18
0-127
19 Multiple traction address
28 Bit RailCom configuration
1 (0) 1
2 (1) 1
Bit Settings 1
29
1 (0) Direction of travel
0
1
2 (1) Running-notches mode:
0
1
channel 1 release for address broadcast
channel 2 release for data and command acknowledge
normal: locomotive drives forward if the arrow on the manual
control points up.
interchanged: locomotive drives forward if the arrow on the
manual control points down.
Operation with 14 or 27 running notches.
This setting is chosen for digital systems which do not
support the 28 running-notches mode.
Operation with 28 or 128 running notches.
This setting is chosen for digital systems which support the
28/128 running-notches mode.
35
254
48
E
96
99
15
192
100
0
3(dec)
1
1
14 (dec)
0
1