IWC Schaffhausen 3239 Mode D'emploi page 28

r e M O v i n g i n d i v i d u a l l i n k s a n d
ting correctly. Keep the surplus links and separating tool in a safe
place for use in any adjustment at another time.
a t t a c h i n g t h e B r a c e l e t
Repeat steps 1 to 3 at the distance from
the first point of separation you have just
determined.
Remove the unnecessary links and reas-
semble the shortened bracelet. Slide the
hinged link into the bracelet sideways (1).
Using the special tool provided, you can
now push down the fixing bolt (2) and, at
the same time, slide the hinged link back
into the bracelet until it lies flush (3). The
fixing bolt must be aligned with the upper
edge of the securing link.
To finish, check that the fixing bolts are sit-
i n g e n i e u r a u t O M a t i c
— 2 8 —