IWC Schaffhausen 3239 Mode D'emploi page 26

t a k i n g t h e B r a c e l e t a p a r t
ation (1) and, at the same time, slide the hinged link with the help
of the second tool about 3 millimetres sideways (2).
— 2 6 —
Open the folding clasp by pressing the but-
ton on the side. Lay the bracelet with the
outside on a firm base. To avoid scratch-
ing the bracelet and base, place a cloth
underneath the bracelet. Using the special
tool provided, you can now push down the
securing pin at the desired point of separ-
Pull the protruding hinged link out of the
bracelet (3). The bracelet is now separ-
ated.
i n g e n i e u r a u t O M a t i c