Radio Reset (Reset) - SilverCrest SAR 28 A1 Mode D'emploi

Display
GB
IE

Radio reset (RESET)

14
♦ Press and hold the BD/DISP
display . Now keep pressing the BD/DISP button to have the following
5
information displayed in turn:
Radio station, time (automatically set with RDS reception), frequency and PTY set-
tings (these RDS functions are sent by broadcasting services in various volumes;
also refer to Section "Radio functions").
NOTE
If you are not receiving any RDS or PTY information, PTY NONE is shown on
►
the display.
► The radio switches back to standard operation after around 5 seconds
without user input.
To reset the device to its default factory settings, keep the RESET
pressed for about 6 seconds with a sharp object, such as a pen.
NOTE
► To access the RESET button, the face plate must be completely removed,
see also Section "Removing the face plate".
Reset the device:
▯ when using for the fi rst time,
▯ after connecting the cables,
▯ when not all function buttons are working,
▯ when an error message is shown on the display,
▯ if there is an obvious malfunction in the device.
button until the time (CT) is shown on the
7
button
22
SAR 28 A1