Samsung DW60M9990AP Manuel D'utilisation page 23

06 Sanitize
(Control Lock)
07 Display
08 Delay Start
09 START (Cancel &
Drain)
DW9900M_DD68-00196B-03_EN.indd 23
With this selected, the water temperature increases to 163 °F
(73 °C) in the final rinse for high temperature sanitization. For
more information, see the Options section on page 27.
Control Lock: Control Lock allows you to lock the buttons on the
control panel except for the POWER button. For more information,
see the Control Lock section on page 29.
Displays information of the current cycle including the cycle
name/time, remaining time, and settings as well as an information
code if found.
You can delay the cycle starting time. For more information, see
the Delay Start section on page 29.
Press START to start operation. Make sure the door is closed.
*Cancel & Drain: To cancel the current cycle and drain the
dishwasher, press and hold START for 3 seconds.
English 23
7/9/2018 6:40:35 PM