Control Panel - Ayce PREDATOR 8 Manuel D'utilisation

CONTROL PANEL

Control panel
ON/OFF Speed button
Swing button Timer button
Sleeping wind
OPERATING INSTRUCTION
When first plug in, the fan with "Bi Bi" sound alerts, then the fan will under standby
status, in which no button and LED indicator light works.
ON/ OFF
press this key for opening up the fan, and LED would light up, but oscillation and timer
wouldn't work. The default set is Normal mode and Medium speed, (LED displays Low
speed instead of Medium speed), then running with Low speed after 3sec. Pressing
again, turning into standby mode.
SPEED
The default is Medium wind speed, then turning into Low wind speed after 3sec with
relevant LED indicator light display, press
High wind speed, which transformation sequence is: Low → Medium → High → Low...,
and the LED light changes accordingly.
SWING
Manually Vertical oscillation: 0°, 30°, 60°, 90° adjust according to users. There is no
oscillation setting by default. Press this key and it automatically swings with the angle of
30°→90°→180°→360°, and the LED light changes accordingly.
Remote Control
Mode button
,
Natural wind
Low medium,high Fan speed
that can transfer among Low, Medium and
MODE
The default mode is Normal wind mode, but its relevant LED light would not indicate.
Press that can transfer modes among Normal, Natural and Sleeping wind mode, which
transformation sequence is: Normal → Natural→Sleeping →Normal. LED display would
make corresponding adjustment when operating relevant mode, but LED wouldn't light in
the Normal mode.
NORMAL WIND
High wind speed high -------
Medium wind speed medium -------
Low wind speed low -------
NATURAL WIND
The fan would automatically shift from High→Medium→Low wind speed, which imitates
natural blowing pattern to make the wind be more comfortable and soft.
There is specific program waveform graph of Natural wind mode as followed:
High Speed Wind
High Middle Speed Wind
Low Speed Wind
Stop
6S 6S 6S 3S 6S
High Speed Wind
Middle Middle Speed Wind
Low Speed Wind
Stop
6S 6S 12S
High Speed Wind
Low Middle Speed Wind
Low Speed Wind
Stop
6S 6S 6S 3S
Sleeping wind
Speed in the following:
1. High speed: 30mins' High speed Normal wind→ 30mins' with Medium speed Natural wind
→ Low speed Natural wind.
2. Medium speed: 30min with Medium speed Natural wind→ Low speed Natural wind.
3. Low speed: Low speed Natural wind.
TIMER
There is no time setting by default. Pressing this key can transfer sequentially as: none
→1h→2h→4h→8h→none... and relevant LED light would light up. The fan would get into
standby mode when finishing timer.
54 | 55
12S 6S 6S 6S 6S 6S 3S 12S
6S 3S 6S 6S 6S 6S 6S 6S 3S 6S
12S 12S 3S 6S 15S 3S 6S
GB
6S
T=90S
6S 6S
T=90S
6S 6S
T=90S