Adeunis RF ARF868 ULR Mode D'emploi page 49

ARF868 Radio Modems - User guide version V1.6
5.4. Configuration coherency
The ARF868 modem contains monitoring of the configuration coherency and prevents saving and operation of invalid parameters.
Radio parameter coherency
Radio power, radio data rate and frequency parameters should correspond to valid combinations presented in the table below (cf Appendices)
and in more detail in the document entitled: "ARF868 Modem channels list" available on the Adeunis RF website.
Protocol parameter coherency
The following parameters should be set according to the combinations shown in the table below:
Register
S222
S254
S204
All other combinations of these registers except those described in the table above are invalid.
Invalid combinations result in the return of a "W" on the AT&W and ATO commands which are not executed in this case.
6. Appendices annexes
A complete list of the usable channels is available on our website: "ARF868 modem Channels list"
Power 500mW (27dBm) - 869.4 - 869.650MHz (maximum authorised powers given in dBm in the table below)
Note: in the event of use of several products close to each other and with an RF data rate of 2.4kbps Adeunis RF suggests only using even
(526, 528...) or odd channels (525, 527...)
Channel Frequency
525 869,4125
526 869,425
527 869,4375
528 869,45
529 869,4625
530 869,475
531 869,4875
532 869,5
533 869,5125
534 869,525
535 869,5375
Legacy X3-PRO Mode
4
11 ; 12
0 or ajustable on demand
2,4kbps 9,6kbps
27
27 20
27
27 23
27
27 23
27
27 25
27
27 27
27
Continuous Asynchronous Protocol
3
1 ; 3 ; 6 ; 8
0
38,4kbps 57,6kbps
23
23 23
25
27 27
Page 24 of 25