Graco 24V641 Instructions page 5

EQUIPMENT Misuse can cause death or
MISUSE serious injury
!
Burn Equipment surfaces and
Hazard fluid that is heated can
become very hot during
operation
Toxic Fluid Toxic fluids or fumes can caus
or Fumes serious injury or death if splashed
Hazard in the eyes or on skin, inhaled, or
swallowed.
M0312
Do not operate the unit when fatigued or un-
der the influen e of drugs or alcohol.
Do not exceed the maximum working pres-
sure or temperature rating of the lowest rated
system component. See Technical Data in all
equipment manuals.
Use fluids and solvents that are compatible
with equipment wetted parts. See Technical
Data in all equipment manuals. Read fluid and
solvent manufacturer's warnings. For com-
plete information about your material, request
MSDS from distributor or retailer.
Do not leave the work area while equipment is
energized or under pressure.
Turn off all equipment when equipment is not
in use.
Check equipment daily. Repair or replace worn
or damaged parts immediately with genuine
manufacturer's replacement parts only.
Do not alter or modify equipment. Alterations
or modific tions may void agency approvals
and create safety hazards.
Make sure all equipment is rated and approved
for the environment in which you are using it.
Use equipment only for it intended purpose.
Call your distributor for information.
Route hoses and cables away from traffi areas,
sharp edges, moving parts, and hot surfaces.
Do not kink or over bend hoses or use hoses to
pull equipment.
Keep children and animals away from work area.
Comply with all applicable safety regulations.
To avoid severe burns do not touch hot fluid or
equipment.
Read MSDS's to know the specific haz-
ards of the fluids ou are using.
Store hazardous fluid in approved con-
tainers, and dispose of it according to
applicable guidelines.
Prolonged contact with the treated
product may cause skin irritations:
always wear protective gloves during
dispensing.
EN
5