I.1 Leaving The System Unused For Long Periods Of Time; I.2 Flushing The Dispensing System - Graco 24V641 Instructions

OPERATION AND USE
1. Connect Coupler & 2. Reset meter
Engage Before pumping, reset
Connect and engage dis- meter by pressing RESET
pense coupler. button.
Handle will reside in the Refer to meter instruction
down position manual 333467 for meter
operation.
4. Dispense DEF 5. Turn off ump
Squeeze nozzle handle To maximize pump service
to begin the dispensing life, press orange off but-
process. Release handle to ton to turn off pum .
stop dispensing
I.1 LEAVING THE SYSTEM UNUSED FOR LONG PERIODS OF TIME
Whenever it is thought that the system will remain unused for
WHAT TO DO at least 15 days, it must be emptied in order to prevent the
product from crystallising inside. This shall be followed by a
flushing ycle.
I.2 FLUSHING THE DISPENSING SYSTEM
The dispensing system requires flushing in order to re-
FOREWORD move product crystallisation which may damage the dis-
pensing system components
TOXIC FLUID OR FUMES HAZARD
WARNING Wear personal protective equipment (PPE) when per-
forming the flush ycle.
Use only demineralised water to flush the system.
NOTICE
Liquids resulting from flushing must be disposed of in accord-
DISPOSAL
ance with the laws prevailing in the country of use
By following the same modes of delivery described above,
the dispensing system can be flushed by sucking up dem-
NOTICE
ineralised water from the clean container and collecting
the resulting mixture in a different disposable container.
M0312
3. Turn on Pump
Press orange ON button.
Pump will self prime after
20-40 seconds.
Refer to pump instruction
manual 333465 or 333466
for pump operation.
6. Document Meter Reading
Reference meter for ac-
curate amount of DEF
dispensed and document
accordingly if required.
SB_D_015
EN
15