H.2 Drum Kit Installation; Operation And Use - Graco 24V641 Instructions

H.2 DRUM KIT INSTALLATION
A
1 2
3 4
5 6
C
I

OPERATION AND USE

Directions on how to start and stop operation of the sys-
tem are given below:
BURN HAZARD
WARNING
During operation the motor may be hot: be careful.
To remove any substance residue or foreign matters
from the pipes, flush the system before putting it into
operation.
NOTICE
To flush the system, follow the same dispensing pro-
cedures using demineralized or deionized water and
eventually flush with AUS32 / D.E.F.
The DEF dispensing system is not equipped with an
suction connection device. This must be installed be-
NOTICE
fore attempting to operate the system.
M0312
B
1x
1 2
3 4
3x
EN
13