Ego Power+ HT2410 Guide D'utilisation page 11

 Check the blade and motor mounting bolts at frequent intervals for proper tightness.
Also, visually inspect blade for damage (e.g., bent, cracked, and worn). Replace the
blade only with a blade from the original equipment manufacturer (OEM).
 Replace the blade if it is bent or cracked. An unbalanced blade causes vibration that
could damage the motor drive unit or cause personal injury.
 If the equipment should start to vibrate abnormally, stop the motor and check
immediately for the cause. Vibration is generally a warning of trouble.
 The trimmer shall be used to cut stems less than 1 in. (26mm) thick.
 Trim only in daylight or in good artificial light.
 Remove or disconnect battery before servicing, cleaning, or removing material from
the hedge trimmer.
 Do not wash with a hose; avoid getting water in motor and electrical connections.
 When servicing use only identical replacement parts listed in this manual. Use of
parts which do not meet the original equipment specifications may lead to improper
performance and compromised safety.
 Do not incinerate the appliance even if it is severely damaged. The batteries can
explode in a fire.
 Follow instructions for lubricating and changing accessories.
 Keep handles dry, clean and free from oil and grease.
 Do not expose a battery pack or tool to fire or excessive temperature. Exposure to
fire or temperature above 212 °F (100°C) may cause explosion.
 Save these instructions. Refer to them frequently and use them to instruct
others who may use this tool. If you loan this tool to someone else, also loan these
instructions to them to prevent misuse of the product and possible injury.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2410/HT2410-FC
SAVE THESE INSTRUCTIONS!
11