max mobility SmartDrive MX2+ Manuel D'utilisation page 6

max mobility
2 ®
Do not operate over significantly rough terrain, very
slick surfaces, extreme slopes, or loose ground. This
may cause a loss of traction, leading to injury or damage to
your SmartDrive and void the warranty.
The SmartDrive is not designed to drive up or down large
curbs / steps. Only perform this maneuver when absolutely
necessary and always ask for help. Also be sure to turn OFF
the power assist [via PushTracker] before maneuvering.
Use extreme caution when operating a SmartDrive at-
tached wheelchair when near streets. Consider turning
OFF the power assist [via PushTracker] to reduce risk.
When crossing major roads, intersection, railway crossings
or highways as well as when you drive steep, long slopes
you should always consider having somebody accompany
you in the interest of your safety.
With regards to driving up and down slopes, please adhere
to the instructions and specifications given by the diverse
wheelchair manufacturers.
Riding over curbs or obstacles can cause tipping and seri-
ous bodily harm. Turn OFF the power assist [via Push-
Tracker] when attempting to ride in these situations. If
you have any doubt that you can safely cross any curb or
obstacle, ALWAYS ask for help. Be aware of your riding
skills and personal limitations. Develop new skills only
with the help of a companion.
The PushTracker should ONLY be worn by the user sitting
in the wheelchair with the SmartDrive attached.
Use caution when operating a SmartDrive attached wheel-
chair indoors or in crowded / confined areas. Consider
turning OFF the power assist [via PushTracker] to reduce
the chance of collision, damage or injury.
Always turn OFF the power assist [via PushTracker] when
parked to prevent accidental activation.
Always turn OFF the power assist [via PushTracker] be-
fore taking the PushTracker off of your wrist.
Tapping force does not need to be excessive or "hard".
Gentle, stiff wrist taps at a reasonable speed (i.e. one half
(0.5) second between taps) is sufficient.
Always use caution when transferring in or out of the
wheelchair. Every precaution should be taken to reduce
the transfer distance and be certain the wheel locks are
engaged to prevent the wheels from moving. Also always
make sure the power assist is OFF [via PushTracker] when
transferring to and from your chair.
NOTES: Figures and diagrams of the SmartDrive in this manual may vary slightly from your device.
An electronic version of this User's Manual along with informational videos are available on our website
[www.max-mobility.com / www.pushtracker.com] for people with visual, reading or cognitive disabilities.
The Serial Number of your SmartDrive is located on its underside. It is recommended that you save this User's Manual and
record the Serial Number below for future reference.
SmartDrive Serial Number:
The optional buttons are designed to be used with
a seat cushion as to prevent sitting directly on the
cables. It is strongly recommended that a seat cushion be
used on your wheelchair when using the buttons.
The SmartDrive and PushTracker have passed industry
climate testing the same as power wheelchairs, and are con-
sidered rain / splash proof. Complete submersion of either
may cause malfunction or damage and void the warranty.
Take the PushTracker off prior to bathing or showering.
Surface temperatures of the SmartDrive can increase and
become hot to the touch when exposed to external sources
of heat, such as sunlight.
Using Anti-Tippers substantially reduces your risk of fall-
ing over backwards, which can cause serious injury. If you
are afraid of tipping over, use anti-tipppers. Anti-Tippers
will keep you from falling over, but they will limit your
ability to be pulled up curbs and some other maneuvers.
Just as children learn to ride bikes without training wheels,
you may be able to learn to use your wheelchair with Anti-
Tippers. It is STRONGLY recommended that Anti-
Tippers be employed to the wheelchair until the user has
become accustomed to operating the SmartDrive in all
possible environments, situations, and conditions.
Do not tip or wheel your wheelchair without assistance,
unless you are highly skilled.
Do not shift your weight or sitting position toward the
direction you are reaching as one's wheelchair may tip over
backwards or sideways.
Do not lean over the top of the back upholstery to reach
objects behind as this may cause the wheelchair to tip over.
Do not stand on the frame of your wheelchair.
Your wheelchair is not designed for weight training and
is unsafe from use as a seat while weight training. Weight
training from your wheelchair substantially changes the
stability of your chair and may cause tipping.
Do not attempt to stop a moving wheelchair with wheel
locks. Wheel locks are not brakes.
Do not take a SmartDrive attached wheelchair on an esca-
lator or moving walkway. Serious bodily injury may occur.
Any unauthorized modifications to the SmartDrive will
void the warranty and may create a safety hazard.
This product can expose you to chemicals including
cumene, which is known to the State of Califor-
nia to cause cancer. For more information, go to
www.P65Warnings.ca.gov
_______________________________________