EINHELL TC-MS 2513 T Instructions D'origine page 21

Danger! - Read the operating instructions to reduce the risk of injury
Caution! Wear ear-muff s. The impact of noise can cause damage to hearing.
Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on
wood and other materials. Never use the device to work on any materials containing asbestos!
Caution! Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted
by the device can cause loss of sight.
Caution! Risk of injury! Do not reach into the running saw blade.
Warning! To make miter cuts (with the saw head inclined or the turntable set at an angle), the adjustab-
le stop rail must be fi xed at an outer position.
To make 90° crosscuts, the adjustable stop rail must be fi xed at the inner position.
Anl_TC_MS_2513_T_SPK9-1.indb 21 Anl_TC_MS_2513_T_SPK9-1.indb 21
GB
- 21 -
07.01.2021 08:20:14 07.01.2021 08:20:14