After Each Use; Every Six Months - Remington ColourCut Clipper HC5035 Mode D'emploi

ENGLISH
C CARE FOR YOUR HAIRCLIPPER

, AFTER EACH USE

• To ensure long lasting performance of your clipper, clean the blades and
unit regularly.
• Ensure the appliance is switched off and unplugged from the mains before
cleaning.
• Brush the accumulated hair from the blades and body of the clipper. Do not
submerge the clipper in water.
• We recommend oiling the blades after cleaning with a little sewing
machine oil.
, Note: Ensure the clipper is turned off when cleaning.

, EVERY SIX MONTHS

• At regular intervals the blade set should be removed and cleaned.
• The blade set can be removed and reinstalled by using a screwdriver.
• Brush out hair and do not use water or cleaners on the blade set or internal
body housing.
, CAUTION: Do not use liquid cleaners on the blades or harsh or corrosive
chemicals on the blade casing. Always use a soft brush to remove the
accumulated hairs.
• Always store this appliance and cord in a moisture-free area.
• Do not wrap the supply cord around the appliance.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked with this
symbol must not be disposed of with unsorted municipal waste, but
recovered, reused or recycled.
6