SQUEEGEE INSTALLATION
1
See Figure 5. Slide the Squeegee Assembly (17) onto the squeegee mount bracket and tighten the Squeegee Mount Thumb Nuts (AA).
2
Connect the Recovery Hose (BB) to the squeegee inlet using Hose Clamp (CC).
3
Follow the steps in the "Squeegee Adjustment" section to properly adjust the squeegee height and angle.
FIGURE 5
2/2014
BB
AA
28
CC
17
INSTRUCTIONS FOR USE
22
56091095 - SC6500
ENGLISH - A
28
A - 13