Maintenance; Scheduled Maintenance Table - Nilfisk Advance Terra 128B Mode D'emploi Et D'entretien

OPERATOR MANUAL

MAINTENANCE

The proper and safe machine operation is guaranteed
by careful and regular maintenance.
The following table sums up the scheduled mainte-
nance for the machine. The indicated periods can be
subjected to variations according to working conditions.
These variations must be defined by the person in
charge of the maintenance.
WARNING!
Maintenance operations are to be carried
out with the machine off, the ignition key
removed and (if required) the battery dis-
connected.
Moreover, carefully read the instructions
in the Safety chapter.

SCHEDULED MAINTENANCE TABLE

Maintenance operation
Battery liquid level check
Drive belt visual inspection: traction, main
broom
Skirt height and operation check
Side and main broom height check
Dust filter cleaning and integrity check
Electric filter-shaker (optional) operation
check
Nut and screw tightening check
Drive belt tensioner adjustment
Drive belt replacement: traction, main broom
Main electric motor carbon brushes check or
replacement
Hood opening switch operation check
(*): For the related procedure see "Service Manual".
(1): Or before each start.
8
All periodic or extraordinary maintenance operations
must be performed by skilled personnel, or by an autho-
rized service center.
This manual describes only the easiest and most com-
mon maintenance procedures.
Every 10
On delivery
hours
" " " " " " " "
(1)
" " " "
" " " "
" " " "
" " " "
(1)
NOTE:
For other maintenance procedures, see
the specific "Service Manual" that can be
consulted at the Advance Service Center.
Every 50 Every 100
hours hours
" " " "
(*)
" " " "
" " " "
(*)
" " " "
(*)
" " " "
(*)
" " " "
(*)
Every 200 Every 400
hours hours
" " " "
(*)
" " " "
(*)
146 0596 000(4)2004-02