Scheduled Maintenance Table - Nilfisk SR 1601 D3 Manuel D'utilisation

SCHEDULED MAINTENANCE TABLE

NOTE
Maintenance intervals given are for average operating conditions. Machines used in severe operational environments
may require service more often.
Procedure
Engine coolant check
Engine oil level check
Hydraulic oil level check
Parking brake check
Main and side broom cleaning
Engine oil change
Oil filter element replacement
V-belt check
Engine coolant circuit check
Battery check
Dust guard system water filter check and
cleaning (optional)
Engine air filter cleaning
Engine radiator and oil cooler cleaning
Broom check and adjustment
Hopper dust filter check and cleaning ("A"
method)
Skirt integrity, height and operation check
Hopper gasket integrity check
Engine maintenance
Steering wheel bearing and hydraulic piston
lubrication
Tank hydraulic oil filter replacement
Pump hydraulic oil filter replacement
Hopper dust filter check and cleaning ("B"
method)
Fuel filter replacement
Fuel fitting and screw tightening
Hopper dust filter check and cleaning ("C"
method)
Supply hose replacement (LPG3)
Hydraulic oil "recharge" filter replacement
Tank hydraulic oil change
(1) For the relevant procedure, see the Service Manual.
(2) Or more often in dusty areas.
(3) Maintenance procedures to be performed by an authorised KUBOTA dealer.
(4) Change the hydraulic oil for the first time after 500 hours, then every year.
All manuals and user guides at all-guides.com
Upon delivery Daily
33019216 - SR 1601 D3 / LPG3 / P3
USER MANUAL
After the Every
Every 30
first 50 150
hours
hours hours
(1) (1)
(1) (1)
(1) (1)
(1)
(2)
(2)
(1) - (3)
(1)
(1)
(1)
(2)
ENGLISH
Every Every
300 1,000
hours hours
(1)
(1)
(2)
(1)
(1)
(1) - (4)
23