Manually Finding The Ip Address Of The Xkm 2000 Module - Miele RemoteVision XKM 2000 WLAN Instructions D'installation

Accessing the module settings

Manually finding the IP address of the XKM 2000 module

a Enter the IP address of your wireless router into the address bar of the web
browser window. Your wireless router's web page should appear. Refer to your
wireless router's manual for information on how to obtain the exact IP address
of your router.
The appearance and wording of the information described below may vary.
b In your router's web page, access the DHCP (Dynamic Host Configuration
Protocol) client list or "Attached Devices". The IP address(es) assigned by your
router to the XKM 2000 module(s) can be found by identifying the host name
Miele or the MAC address with the prefix 00:1d:63. Consult your wireless router
Instruction Manual for DHCP specific details and illustrations.
c Open a second web browser screen.
Keep the browser with the wireless router web page open and accessible.
d Enter the IP address of the XKM 2000 module (taken from the DHCP Client list
or Attached Devices) into the address bar of the second web browser. The
following screen will appear:
12