f) Sound-to-Light mode
In this operating mode, the effect light is controlled via an installed microphone in the cycle of the music.
• Select the desired programme Snd.1-Snd.4 in menu Soud.
• Now set the desired sensitivity with Sd.00-Sd.99.
The light effect should change in time with the music here.
g) Operation with static colour setting
In this operating mode, a fixed colour setting is performed.
• Select StAt in the menu.
• Define the desired colour by setting the colour intensities of the individual LEDs as follows:
r.000-r.255
G.000-G.255
b.000-b.255
A.000-A.255
u.000-u.255
h) Temperature monitoring
Here, the current temperature of the effect light can be called and the temperature deactivation can be set.
• Select tenP in the menu.
• You can call the current temperature in the menu item cutP (e.g. t.031 = 31 °C).
• In the menu item toP, you can set the deactivation temperature (t.000-t.085 = 0-85 °C). If the temperature
within the device reaches this threshold, the effect light will switch off for safety.
Intensity red
Intensity green
Intensity blue
Intensity amber
Intensity white
33