Storage Recommendations; Package Contents - DeWalt DCS391 Traduction De La Notice D'instructions Originale

Storage Recommendations

1. The best storage place is one that is cool and
dry away from direct sunlight and excess heat
or cold. For optimum battery performance and
life, store battery packs at room temperature
when not in use.
2. For long storage, it is recommended to store a
fully charged battery pack in a cool, dry place
out of the charger for optimal results.
NOTE: Battery packs should not be stored
completely depleted of charge. The battery pack will
need to be recharged before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual,
the labels on the charger and the battery pack show
the following pictographs:
Read instruction manual before use.
Charging.
Fully charged.
Hot/cold pack delay.
x
Problem pack or charger.
Problem powerline.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Use only with D WALT battery packs.
E
Others may burst, causing personal injury
and damage.
Do not expose to water.
Have defective cords replaced
immediately.
Charge only between 4 °C and 40 °C.
Discard the battery pack with due care for
the environment.
Do not incinerate the battery pack.
Charges Li-Ion battery packs.
See Technical Data for charging time.
Only for indoor use.

Package Contents

The package contains:
1 Cordless circular saw
1 24-tooth blade
1 Hex key
1 Rip Guide
1 Plastic bag:
1 Dust extraction port
1 M4 X 18 Cap screw
2 Li-Ion battery packs (L2, M2 models)
1 Kitbox
1 Charger
1 Instruction manual
1 Exploded drawing
NOTE: Battery packs, chargers and kitboxes are not
included with N-models.
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1, 4, 6)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Trigger switch lock-off button
b. Trigger switch
c. Battery pack
d. Depth adjustment lever
e. Shoe
f. Lower blade guard retracting lever
g. Lower blade guard
h. Blade clamping screw
i. Kerf indicator
j. Bevel adjustment knob
EN GL IS H
41